Skip to main content

Pink encouragement card

Hello there! Erica on the blog today with another very pink card. Using pink for our cards for the month of October here on Kennedy Grace Creations is to raise awareness for something that's touched many of us here personally, breast cancer. Cancer is a horrible, horrible disease and affects far more of us than many believe. As many as one in three. Now that's very scary statistics. If you haven't done so already, make sure you have your breasts thoroughly examined and go to the doctor immediately if you spot anything suspicious at all. It's always better to be safe than sorry.

Today's card has quite a few different elements to it and it did take me two whole days to make it. That's probably mostly due to the fact I started late one evening and had to go to bed before it was done but lets say it was because the water colouring had to dry. Makes me sound less like a tired old grump!
I started by picking out two different shades of pink in a lovely linen textured card stock as well as a bright white. The white was both for the detail and for the base of the card. By now, no one will be surprised that I used my trusted A2 stitched rectangle Lawn Fawn die for the card base part. Come on now, was anyone really surprised? Raise of hands. Ok, that would be....hmmm... not a single one... LOL!

I also cut a rectangle out in both the pink shades. This is to ensure that the details line up perfectly when you are cutting them out by lining up the edges before running it through your cutting machine. Another way of doing it, any this is simpler to be honest, is to cut out the details first, stick them together with double-sided tape and then cut out the stitched rectangle. Please note, that this will only work if you do paper piercing. You can cheat and simply layer the card stock on top of each other but this makes the card very heavy and bulky. Plus you run the risk of damaging your BigShot/other brand of cutting machine when cutting out the rectangle border.

Using a stitched pretty border from Pretty Pink Posh, I started cutting out thin strips of the card stock, one white and two each of the pink. I placed two bits of card stock on top of each other and ran it through my BigShot, taking one of the strips out after each time. Once I had enough, I used a bit of PostIt tape that I had stuck to my work table with the sticky side up and started layering the pieces together. The reason I used PostIt tape instead of double-sided tape right away was to make sure all the bits stayed where they were supposed to be. I've done this in the past and it's ended up all wonky or with gaps. That's not the look you want.
Turning the pieces over, still attached to the PostIt tape, I then added my double sided tape after inspecting it and being happy that there were no gaps or wonky bits. I used a 2" wide tape and placed it on both edges as well as the middle.

Taking the A2 piece I cut out earlier, I placed that in my Mini MISTI and positioned the paper-pierced piece on top of it where I wanted it to go. I picked out a sentiment, for this card I chose 'you are in my thoughts and prayers' from Grace's Happy Heart stamp set, which I stamped in a dark pink ink in the bottom left corner.

Having finished all those bits and pieces, I picked out the gorgeous Beautiful Bloom-Sweet Rose stamp and decided to water colour it. I've still got those Gansai Tambi water colours my friend lent me and I try to make the most of them whilst I still have them on hand. Using RangerInk water colour paper, I stamped up the flower with VersaMark ink and heat embossed it with Wow embossing powder in Opaque Bright White. As I was going for a pink theme, I used no35 of the Gansai colours and diluted it quite a lot for the first layer, just to get that pink-ish tint. Adding layer by layer, slowly and letting it dry in between, the flower started to come to life. I simply adore how you can get so many different looks from the same stamp just by using different colour combos, techniques and style. I went with soft pink for the big petals and darker pink details for contrast. For the leaves I used two different shades of green.
With water colouring I find it hard to know when to stop and when it's just enough, I haven't quite found that happy, perfect medium yet. However I try not to stress about that, I do enjoy practicing and seeing the images change before me and that's all that matters. Once I decided it was finished, I fussy cut the image out as best I could without ruining the heat embossed edges. It's quite tricky! Maybe it's time to start hinting to hubby quite seriously about getting a Scan'n'Cut for Christmas?? 

To assemble the card, I used my beloved foam tape. It's one of my absolute must-haves when it comes to crafting and I like using different thickness to add lots of layers and dimension. Starting with the paper pierced piece, I added a generous amount to stop it from sagging anywhere. It needed to be quite sturdy to stay flat and also to support the flower which also got foam taped to within an inch of it's life. Adhering it to the card, I stepped back to look at it and decided that it simply had to have some sequins. Using different sizes of sequins from the Moonbeam mix, I placed them in a bit of a "spray shape" on the card and once I was happy, I used Glossy Accents to glue them on. 

Well, that's all from me today. I hope you like the card as much as I do and that I have inspired you to try one of these techniques.

Happy crafting from Erica 

PS don't forget to get your "girls" aka breast checked out! 



Popular posts from this blog

Design Team Call

Hello Crafty and Cardmaking Friends! Kennedy Grace Creations is super excited to announce our second ever Design Team (DT) Call!!!
We are looking for crafty DT members that are creative, kind, reliable, energetic, hardworking and passionate about stamping, diecutting, cardmaking & paper crafting! Must also be active on various social media sites (FB and/or IG) and have a current crafty blog. 
 The DT members will be asked to create three projects per month. Products must showcase the Kennedy Grace product line and creations can be any sort of paper craft. I.e.; handmade cards, postcards, albums, journals, boxes, etc.
Design Team Requirements
•   Must love Kennedy Grace Products. We are a company that produces clear photopolymer stamps, creative dies, and sequins. (Bonus if you're a floral and sequin lover, as that is what our brand focuses on!)
•   Have the ability to meet tri-monthly deadlines.
•   Have active Social Media (Instagram &/or Facebook and an active blog mandatory) …

New Release and Blog Hop

Welcome, crafting and cardmaking friends!!!

This is a Kennedy Grace Creations blog hop! We are debuting our newest 4"x6" clear stamp set - Sweet Baby Mine! (PLUS- we have some new sequins to coordinate with this set, called Baby Blanket). Please hop along through to see out talented design teams creations!

Here is the card I made for you today.

Used the adorable giraffe image colored it with zig real brush markers and added little bit if sparkle to a few areas ( you can't see it in the photo's but in real life it is adorable). 

Here is a close up of what we are releasing today.  
This beauty is called Winter Mint
This one is called Frozen
Here is Baby Blanket

We hope you love it as much as we do.  Be sure to hop along and leave lots of love for our designers.  
Thank you for hopping along with us! Inspiration, here we come! If you are hopping along here is the list of designers in the hop.
Michelle (START HERE, Owner of KGC)  Erica

Baby Boy card bonanza!

Hi, Erica here with two cards today!

For the release post I made two baby girl card and only one boy card. Naturally, all my friends have decided to give birth to baby boys recently so that one itty-bitty card was already spoken for. Time to remedy that with another two boy cards and the sweet Sweet Baby Mine stamp set.

I started by cutting two A2 sized pieces of Strathmore Bristol Vellum card stock as I wanted to do an ink blended background for both cards. Using Post-It tape I taped strips across the panel to create a pattern, slightly different on both to keep it interesting. On one I went for blue and the other one got green and yellow. I also splattered more blue ink on the blue one and green ink on the green/yellow one.

On another piece of Bristol I stamped two baby lions with VersaMark ink and heat embossed them in white embossing powder. These got coloured in with Zig markers and then fussy cut.

On the blue card I also cut out a white frame as well as the words 'A Boy'…